Mezzanine Goods Floor Lifter, Manual Handling Solutions Goods Lift


See more examples... 1 | 2 | 3 | 4 | 5 | 6 | 7| 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | Mezzanine Floor Enquiry Form
 

 

  • Typical overview of the Mezzanine floor lifter:
  • The lift will be constructed using a single mast which must be bolted to the Mezzanine floor RSJ through the floor
  • The lift platform will measure approximately 1400mm wide by 1200mm deep and will close down over the legs
  • The clear working platform area will be 1340mm x 1140mm
  • The overall plan size of the lift will be approx 1400mm wide x 1450mm deep
  • The platform will feature 1100mm high rails on all sides and a single outwards opening gate on both the right and left hand sides of the mast. The gates will be spring loaded and will lock with a gravity system but will also be sensed to prevent platform movement if the gate is open.
  • The platform will close to the floor with a 60mm lowered height and have a total raised height of 3030mm
  • The maximum lift height will be governed by a limit switch system to ensure that the platform parks with the mezzanine upper floor.
  • The platform will be supplied with a loading ramp to be permanently fixed to the ground floor measuring 1150mm wide by 600mm long giving a gradient of 10%. Mounted to the Left Hand side of the mast
  • The hydraulic power pack and electrical system will be housed in a separate wall mounted box at ground level.
  • Control points will be positioned at both ground and upper floor levels. Both points will feature latching call buttons and emergency stop controls.
  • Power requirement: 415V 3 phase + Neutral via 10amp isolator (Supplied by customer)
  • Motor specification: 0.8Kw 3phase 415V with 3ltr reservoir
  • Maximum lift capacity will be 500Kg
  • The lift will be supplied with an external guard to fully enclose the unit over the full stroke and will comprise as follows:
  • 4100mm high mesh panels on two sides with a single out-ward opening gate on the left hand side. The gate will be fitted with an electrical interlock to prevent opening when the lift is not parked.
  • The upper level will be a simple gate mounted to the edge of the Mezzanine 1100mm high outwards opening with an electrical interlock to prevent opening when the lift is not parked.

See more examples... 1 | 2 | 3 | 4 | 5 | 6 | 7| 8 | 9 | 10 | 11 | 12 | 13 | 14

Mezzanine Floor Enquiry Form

Product Downloads

MHS Solutions Range.pdf

Mezzanine Floor Lifter.pdf

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk