Mezzanine Floor Lifter- Fisher BioServices UK Goods Lift

Design, manufacture and install 1 off mast-type goods lift to be installed between 2 fixed levels inside a building     

• The lift will be constructed using a single mast which must be tied into the mezzanine floor structure, within a shallow pit.
• The lift platform will measure approximately 1430mm wide by 1410mm deep and will close down over the legs of the masts
• The clear working platform area will be 1350mm x 1350mm
• The overall plan size of the lift including enclosure will be approx 1830mm deep x 1910mm wide
• The platform will feature 1100mm high rails on 4 sides with a single outwards opening gate in front of the mast (Side B). The gate will lock with a gravity system but will also be sensed to prevent platform movement if the gate is open.
• The platform will close to the floor with a 60mm lowered height and have a maximum total raised height of 4300mm
• The maximum lift height will be governed by a limit switch system to ensure that the platform parks with the mezzanine upper floor.
• The platform will NOT be supplied with a loading ramp
• The lift will be supplied with a bridging plate to be installed on the mezzanine level
• The hydraulic power pack will be mounted to the mast and electrical system will be housed in a separate enclosure mounted box at ground level.
• Control points will be positioned at both ground and upper floor levels. Both points will feature latching call buttons and emergency stop controls.
• Power requirement: 415V 3 phase + Neutral via 16amp isolator (Supplied by customer)
• Motor specification: 0.75Kw 3phase 415V with 4ltr reservoir
• Maximum lift capacity will be 500Kg
•  

Manufacture and install 1 off External guard system for both upper and lower floors

• The lift will be supplied with a full height enclosure on all sides, measuring approximately 1830mm deep, 1910mm wide and 6900mm high overall. The enclosure will feature single gates on side B at both levels; 2200mm high on the ground floor and 1100mm high on the first floor. All gates will be fitted with an electrical/mechanical interlock to prevent opening when the lift is not parked.